Spacer Bar Dangle Earrings

3. This next step takes a little patience. The chain I used fits through the holes in the spacer bars, but it takes a little work to get them through, which is good. This is why the bar actually stays put once you get it in position. Insert the end of one piece of chain that you just used in the previous step through one hole in the spacer bar. Grasp the link on the other side of the hole with flat-nosed pliers to help snake the chain through the hole. Then continue this until you get the bar all the way up to just allow one oval link in between the wrapped loop crystal section and the bar.

You want to position an oval link inside the hole so you don't see it. Repeat this for the other sections of chain until you have all three through and positioned on the bar.